Descripción
The ETA-approved fischer FIF-PN plaster fixing is ideal for securely fixing pressure-resistant insulation up to 190 mm thick on plaster façades, such as polystyrene boards, lightweight wood wool panels and PU panels on concrete, solid and perforated brick.
The fischer FIF-PN plaster fixing consists of a grey plug sleeve with a pre-shaped octagonal disc and a plastic nail. The FIF-PN is hammered in.
The integrated hammer stop prevents the fixing from expanding prematurely, allowing for a trouble-free installation. The fiberglass-reinforced plastic nail reduces heat transmission and prevents marks on the plaster surface.
ADVANTAGES
- To set with a few hammer blows.
- The disc fits perfectly into the insulation thanks to its thickness of only 2.7 mm. It therefore allows the application of thin and low-cost reinforcement layers.
- Optimised holding forces thanks to the fibreglass-reinforced plastic (GRP) nail.
- The low anchoring depth of 35 mm saves drilling times.
- Thanks to the GRP nail, the fixing is free of thermal bridges with a Chi value of 0.000 [W/K].
- The compression zone on the stem allows the disc to be accurately inserted into the insulation.
- For insulation material thicknesses up to 180 mm.
APPLICATIONS
- Installation of ETICS insulation panels in concrete and masonry
- Flush installation of conventional ETICS insulation materials e.g. polystyrene
- Material classes Building A, B, C, D, E
- Concrete
- Solid brick
- Solid sandstone brick
- Hollow blocks of lightweight concrete
- Vertical perforated brick
- Perforated sandstone brick
- Lightweight aggregate concrete
- Cellular concrete
SPECS
| ETA approval | Yeah |
| Hole diameter | 8 mm |
| Min. Drill hole depth (h1) | 45 mm |
| Anchorage length (l) | 148 mm |
| Max. Accessory Thickness ( t fix ) | 110 mm |
| Disk ø | 60 mm |
| Content | 100 |
| EAN | 4048962332452 |
