Descripción
Canister of multi-application, fast-hardening Fischer foam, ideal for construction, assembly and DIY.
CHARACTERISTICS
- Paintable and sandable
- Window joint sealing
- Filling gaps, blind boxes
- Assembly of electrical panels
PREPARATION
- Good adhesion on all typical construction materials, such as brick, concrete, plaster, wood, rigid PVC, etc. The work surface must be clean and free of grease. Pre-spray the surface with water. Product temperature between +15ºC and +30ºC. Surface temperature between +5ºC and +30ºC.
APPLICATION
- Put on protective gloves. Shake the can vigorously for 10-20 seconds, keeping the valve down. Screw the can onto the gun (the working position is with the valve facing down). Do not completely fill the gap, because the foam expands and could deform the bearing. For several layers, moisten between layers. It can be played after 10 minutes, and cut after approximately 40 minutes. Does not adhere to PE, PP or PTFE.
CLEANING
- Fresh foam in a can or gun should be removed immediately with Fischer special cleaner. Dried foam is only removed by mechanical means.