Descripción
The Aguastop Bottle is an anti-humidity membrane for interiors. Prevents the appearance of stains due to leaks or condensation on ceilings and walls regardless of their origin, preventing the reappearance of stains in the treated area. Ideal for humid rooms especially prone to this type of humidity such as bathrooms, kitchens, cellars, basements or garages.
It covers stains from rain leaks or leaks, humidity due to condensation, and even humidity from the subsoil, resisting the appearance of saline efflorescence without uncorking*. Its exclusive formula allows you to create a waterproof membrane in just two layers, protecting the support more than traditional anti-humidity paints.
- 100% waterproof
- Resists pressure and counterpressure
- Permeable to water vapor
- Does not chip
- Applicable on damp supports (<10%)
- Paintable
- Easy application
- Washable
- Matte finish
- Rooms with humidity due to condensation
- Walls subjected to strong temperature variations.
- Underground rooms (basements, garages, cellars) or ground floors with humidity coming from the underground
- Walls with capillary damp
- Plaster, cardboard, cement-based mortar plaster, after placing ceramic, construction materials
AVAILABLE SIZES
- 1kg jar
- 4 kg jar
HOW TO USE
Support preparation
- The surfaces to be treated must be clean of dust, salt, mold, remains of old paints and other disintegrated materials that could reduce the adhesion capacity of the product.
- If the surface is in very poor condition (flaking plaster or plaster, peeling paint, blisters, etc.), the area must be cleaned and the work support well reconstructed before applying
- If the surface has black stains or mold, clean it first with bleach or specific products for removing mold, algae or scum.
- Always stir the product before application
Humidity coming from outside (back pressure)
- Apply directly to the work material, eliminating, if any, any disintegrable material (plaster, plaster, etc.).
- Apply two crossed layers of product at an approximate consumption of 0.5 Kg/m2 per layer, allowing 6 to 8 hours to dry between layers.
Humidity coming from the interior (Condensation)
- With the support clean and dry following the instructions for preparing the support, apply two crossed layers of product at an approximate consumption of 0.5 Kg/m2 per layer, allowing 6 to 8 hours to dry between layers. Let it dry for a minimum of 12 hours before painting with an acrylic paint as a finish.
TIPS AND PRECAUTIONS
- Applicable with a brush or roller. After use, clean the utensils with solvent.
- Application temperature between 5º C and 35º C.
- It is not recommended to color or modify the contents of the container in any way. Once dry, it can be plastered, tiled or painted over with acrylic paint.
- If you see cracks of more than 3 mm in the support, repair before applying.
- For more information consult technical sheet